Hettich ROTINA 380 Operating Instructions Manual page 25

AB1701en_SA
1
4
4
Fig. 21: Transport lock
1 Screws
2 Motor cover
3 *Bellows (only for centrifuges with cooling)
4 Transport lock
5 Transport lock screws
6 Spacer sleeve
1. Open the lid.
2. Unscrew 4 screws (
3. Remove the motor cover (
4. For ROTINA 380 R:
Remove the bellows (
5. Unscrew 3 transport lock screws (
6. Remove the transport lock screws (
4 ) and store them safely.
port locks (
7. For ROTINA 380 R:
Insert the bellows (
3 ) over the edge of the rotor vessel. Note the
Push the bellows (
recess for the cable.
8. Turn over the motor cover (
Rev.: 04 / 11.2023
1
4
1 ).
2 ).
3 ).
5 ).
5 ), spacer sleeves ( 6 ) and trans-
3 ).
2 ) and screw it on.
Commissioning
2
3
23 / 63