Swann AMU-II Oxytrace Operator's Manual page 54

AMU-II Oxytrace
Program List and Explanations
2.2.1.4
2.2.2
2.2.2.1
2.2.3
2.3 Sample
2.3.301
2.4 I/O State
2.4.1
2.5 Interface
2.5.1
54
Cal. History
Review the diagnostic values of the last calibration of the oxygen
sensor. Max. 64 data records are memorized.
Number: Calibration counter.
Date, Time: Date and time of the calibration.
Sat. Current: Saturation current at that time of calibration.
Air pressure: Air pressure at that time of calibration.
Miscellaneous:
Case Temp: Shows the actual temperature in °C inside the transmit-
ter.
Air pressure: Shows the actual air pressure in hPa.
QA History
Review QA values (Number, Date, Time, Deviation oxygen, Devia-
tion Temperature, Status of QA check) of the last quality assurance
procedures.
Sample ID: Shows the assigned sample identification. This
identification is defined by the user to identify the location of the
sample
Temperature: Shows temperature in °C.
(Nt5K): Shows raw value of the temperature in 
Sample Flow: Shows the sample flow in l/h
(Raw value) Shows the sample flow in Hz
Shows actual status of all in- and outputs.
Alarm Relay:
Relay 1 and 2:
Input:
Signal Output 1 and 2:
Only available if optional interface is installed.
Shows the programmed communication settings.
Active or inactive.
Active or inactive.
Open or closed.
Actual current in mA
A-96.150.541 / 111223