Table of Contents
Advertisement
2000 Series
Installation Guide
Figure 9 ao/aod Actuator Dimensional Drawing
**These three mounting surfaces are flat
within 0.004 in. (0.1mm) TIR, in a tolerance
zone of 16 x 3.5 in. (410 x 90 mm). The
surface to which the actuator is mounted
must also have the same flatness tolerance.
BASE (OPTIONAL)
100-214-226 Rev. 10
machined mounting
surfaces (3 places)**
Installation Requirements
43.0
1092mm
SECTION A-A
15
Advertisement
Table of Contents
