For A 15 Khz System; For A 20Khz System; For A 30Khz System - Branson 2000 Series Installation Manual

Hide thumbs Also See for 2000 Series:
Table of Contents

Advertisement

2000 Series
Installation Guide

For a 15 kHz System

Step
Clean the mating surfaces of the converter, booster, and horn. Remove any
1
foreign material from the threaded holes.
Install the threaded stud into the top of the booster. Torque to 450 in-lbs,
2
50.84Nm. If the stud is dry, apply 1 or 2 drops of a light lubricating oil before
installing.
Install the threaded stud into the top of the horn. Torque to 450 in-lbs, 50.84Nm.
3
If the stud is dry, apply 1 or 2 drops of a light lubricating oil before installing.
Install a single Mylar washer (matching the size of the washer to the stud) to
4
each interface.
5
Assemble the converter to the booster and the booster to the horn.
6
Torque to 250 in-lbs, 28.25 Nm.

For a 20kHz System

Step
Clean the mating surfaces of the converter, booster, and horn. Remove any
1
foreign material from the threaded holes.
Install the threaded stud into the top of the booster. Torque to 450 in-lbs, 50.84
2
Nm. If the stud is dry, apply 1 or 2 drops of a light lubricating oil before installing.
Install the threaded stud into the top of the horn. Torque to 450 in-lbs, 50.84 Nm.
3
If the stud is dry, apply 1 or 2 drops of a light lubricating oil before installing.
Install a single Mylar washer (matching the size of the washer to the stud) to
4
each interface.
5
Assemble the converter to the booster and the booster to the horn.
6
Torque to 220 in-lbs, 24.85 Nm.

For a 30kHz System

Step
Clean the mating surfaces of the converter, booster, and horn. Remove any
1
foreign material from the threaded holes.
Install the threaded stud into the top of the booster; torque to 290 in-lbs, 32.76
2
Nm.
3
Install the threaded stud into the top of the horn; torque to 290 in-lbs, 32.76 Nm.
Install the retainer ring on the booster using the 4 M3 x 8 screws and lock
washers provided in the CA-30 Converter Kit. Line up all screw holes before
4
inserting screws. Apply Loctite®
100-214-226 Rev. 10
Assemble the Acoustic Stack
Action
Action
Action
1
222 threadlocker and tighten
41

Advertisement

Table of Contents
loading

Table of Contents