Table of Contents
Advertisement
Factory Air
The cable lengths are limited based on the operating frequency of the welding system. Perfor-
mance and results can suffer if the RF cable is crushed, pinched, damaged or modified. Contact
your Branson Representative if you have special cable requirements. In some cases, remote oper-
ation from a User I/O or a Host Computer can be used to solve a distance limitation.
Input Power (Main)
The system requires single-phase input power, which you connect to the Power Supply using the integral
power cord. See "Table 5, Input Power Requirements" for plug and receptacle requirements for your
specific power level.
Refer to the unit's Model Data Tag to be sure of the power rating of the Model in your system.
28
100-214-226 Rev. 10
Advertisement
Table of Contents
