Advertisement
i. Listening
io ihe Demo
Song
Layout
of the Muiti-Timbral
Sound
Module
How
to:
Set
the
Heset
Function
© In Play mode, press the EDIT | SYSTEM
jbutton.
Yow H see a screen like the following.
"i
fi
=
The *
G" wil flash.
© Press PARAMETER]
PREVIOUS
fthree (3) times.
"PLAY/STP" will be displayed in the screen.
| |
Dd
The * ']" will flash
G Press [ENTER/YES | .
You'll sec a screen like the foliowing, indicating the current reset status.
Switch with the VALUE
buttons.
@ in this screen, press the VALUE
[INC ] and
buttons to switch between Reset On and
Reset Off.
RESET ON
: After pressing the pedal to pause play, the next press "takes it from
the top" — sends you immediately back to the first bar and starts play.
RESET OFF
: After pressing the pedal to pause play. the next press starts play
again from the pause point.
® When the settings are completed, press | EXIT/NO
jtwo (2j times to return to Play mode.
*The settings you make by pressing the EDIT | SYSTEM | button are automatically saved
even after you turn off the power. There's no need to perform a Patch Write operation to
save data, like you do after editing a Patch.
* You can also set something called 'Repeat Play' when playing back Recorder data. Once
the song has played all the way through. Repeat Play returns you to the first bar again and
continues play.
See "The Recorder: Miscellaneous Settings" («r
P. 5-25) for how to set this.
Advertisement
