Advertisement
for Patch
Edning
6.Convenient
Functior
Ed
—
[]Copy
One Tone to Another
(Tone Copy
Function)
This function lets you copy the entire [st tor 2nd) Tone from any
Patch you fi
i make it the Ist
inal Tone plus Envelope
Tone of the Patch you are currently editing. The copied data includes the Orig
and Filter, and all the other Edit parameters that apply to cach Tone.
* You can't copy to the 2nd Tone, however.
x Note Shift settings cannot be Copied.
How
to:
Copy
the 2nd
Tone
Contents
into
the
Ist
Tone
(Example)
®© in Edit mode, press the EDIT | WRITE/COPY
jbuttan
You'll see a
en like the folowing.
The *
D " will flash
Q Press the PARAMETER|
NEXT ]button two (2) times.
This pats you to where you can select the "Copy 2nd Tone" function.
The"
2 " will be flashing.
* M you only press it once, you select the "Copy 1st Tone" function. The steps would be the
same, though, from here on.
G Press}
ENTER/YES į.
This confirms thai you want to enter the "Copy 2nd Tone" function
Li i
il
"the
D
i
The" 2" stops flashing.
Copy source Patch number (change with VALUE INCIDECI
ed in the lower part of the screen
£114 in this example? is the "copy source" Patch
The number disp
. (When you use Tone Copy, the
number or the Patch fram which you are going to copy the 2nd Ton
"copy destination" is always the Ist Tone of the Patch vou are currently editing.?
e Press the VALUE
[INC | and [DEC] buttons as needed to select the copy source
Patch
number you want.
ft should be different from the current Patch number, or else there's no point to the operation!
Advertisement
