Advertisement
1. Playing
an
External
Sound
Module
with
a Guter
RES
ee
om
el Press PARAMETER] PREVIOUS ]ihree (3) times.
This selects the "PG.CHG" screen.
The * 5 " wili flash.
@ Press [ENTER/VES ] .
Right after the "S-ALL" is the Program Change number that is sent out whenever you select the patch
called up in Step (D.
The" 5^ will stop flashing.
© Press the PARAMETER | NEXT
{button repeatedly to scroll through the strings you can set
(back up with PARAMETER]
PREVIOUS
j).
As in the diagram below, the strings are listed in order. next to the Program Change number that gets
sent over the appropriate channel for that string.
t.
Change the Program Number with the
=~
-
VALUE ENG] and [SEC] buttons.
z E
s | eARAMETER[PREVIGUS]
& T
5 T
1
Change the string number:
5T
1
STRE
44 PARAMETER [NEX7]
© Scroll to each string in turn, and change the Program Number as desired with the VALUE
[INC Jand
buttons.
e When you're all finished setting, press the| EXIT
jbutton two (2) times,
You will be returned to Play mode.
* Now, be sure to perform a Patch Write (<r P. 3-14) to save the changes you have made.
Repeat this procedure for each patch to which you wish to assign a Program Change for
each string.
+ This function can be used only when the GR - 1 is set to fhe Mono mode («r P, 6-2).
{f you are using a C Type external sound module (<r P. 6—
to send multiple Patch Changes at once. So to prevent that, set all strings to the same Program f
Change number with the
and
butions at the "S-ALL" screen, as shown in Step ©.
Advertisement
