Advertisement
6.Convenient Functions for Patch Editing
Here a re a couple of handy
atures you can
when creating your own Patches from pre-
sting Patches on the GR - i:
ap Isu22d"
and "Tone Copy."
LlSwapping
the Ist and 2nd Tones
"Swap Ist/2nd™ is the function to use if you want to make the Ist and Ing Tones
"c
places".
Performing this operation means the sound that was assigned to the Ist Tone is now a
ed to the
2nd Tone, and vice versa.
How
to:
Swap
1st
and
2nd
Tones
o in the Play mode, select the Patch containing the Tones you wish to switch.
Q Press EDIT | WRITE/COPY
| .
You'll see the following screen.
The " []" will flash.
() Press PARAMETER[NEXT ]three (3) times
That brings us to the following screen for entering the "Swap {st/2nd" function.
The" 3" will flash.
e Press; ENTER/YES
As always, the number in the display will stop Mashing to confirm that you have entered this function.
The " 3" will stop flashing.
f R's OK to switch these Tones, press|
ENTER/YES
The "OK?" message (asking you for confirmation) will now start flashing
JOK? ia
4—24
Advertisement
