Advertisement
In Section 3, "Editing: Turning Reverb and Chorus On/Off" we showed vou how to make simple changes to reverb and chorus esing the
knobs on the front panel and thel REVERB/CHORVS
|button. Now let's return to the subject and (ill in a few details.
First we'll explain a little about the procedure.
How
to:
Make
Reverb
Effect
Settings
This is a general method for setting the various reverb "parameters"
(settings that define basic
elements of the sound).
@ Press EDIT [PATER].
The * 9 "will flash
© Press the PARAMETER]
PREVIOUS
|button two (2) times.
The " 9" will flash.
@ Press| ENTER/YES
| .
"This is the screen for making reverb settings, so enter it
The *
2" wil stop flashing.
® Now, by pressing PARAMETER]
NEXT
jand | PREVIOUS
| , you can step through the various
reverb parameters that you will want to set.
& The settings themselves are made by pressing the VALUE | INC [and
buttons.
and
& Repeat Steps
as many times as necessary to make all the settings you want.
D When you're finished, press | EXIT/NO | however many times i takes to return to the Play
mode.
* And as always, you need to save any changes you make with Patch Write (= P. 3-14)
Advertisement
