Advertisement
4. Song
Editing
(Copy. Erase and
Delete)
@— 2 Press PARAMETER [NEXT | PREVIOUS].
Select the track to Erase: "TRK 1" through "TRK 3," "DRU
3
A" or "ALL." In this example, i's "TRE
e Specity the Erase range.
@— 1 press [ENTER/YES ] .
You'll see the following screen
=
oe,
fi
p.
Move with CURSOR
[>], change with
a |
5
=
E
VALUE [INCIDEC]
1
f " Eight bars long...
„Starting from Bar 5"
On the left is the bar number to start from, and on the right is the number of bars in the section to be
Erased.
@—
2 Select one or the other with the CURSOR
EIES] buttons (the selected item
flashes), and change the values with the VALUE [INC ]and
buttons.
So now the Erase range is set for "eight bars, starting from Bar 5" (i,e.. Bars 5 through
i2)
© Erase!
©—
1 Now that you've specified the Erase range, press | ENTER/YES
| .
The "OK?" message will start flashing in the display.
()— 2 Press| ENTER/YES
|once more to say "sure, go ahead."
The screen responds with the message "COMPLETE" as the data is Erased, then returns
you to the screen in Step (4).
&—
3 Press[ EXIT/NO Ja few times.
This takes you back, one screen at a time
** With the Erase function, once it's gone there's no way to recover the data, so be carefull
Advertisement
