Advertisement
what
to Do if You
9c
Think
Ther
Cause
: The Expansion Board is not installed,
What to do : Original Tones numbered from 200 to
your nearest Roland service center (ther
99 are only found on this Board,
so bead for
"s a list on the inside back cover) and talk to
them about installing one for you.
C3
J
Epy
ERR
Cause
: System Exclusive data was not successfully received
What to do : Check the connections and try the data transfer procedure again
Cause
: The maximum 2000-noie memory of the built-in Recorder is full, and no more data
can be input.
What to do : Think of how you could cut down the length of the song or change the structure to
make it fit, or delete parts you don't need, then try the recording again,
Cause
: There is no Recorder song data writen on the Card (formated
(or GR
1 use)
currently inserted in the Card slot.
What to do : Insert a Card that contains song data.
OY R
Cause
: The GR - 1. was unable to internally process the received data ("choked") because too
many MIDI messages were being sent at the same time hy external MIDI dev
What to do : Reduce the number of MIDI messages being sent to the GR - ] and try transmission
again.
Advertisement
