Advertisement
5. MID!
Control
of External
Effects
6:28
CD— 3 Press [ENTERVES].
The current basic channel is displayed (in this case
"11,7
The" 2" will stop flashing.
Q-— 4
f you must change this for any reason, do so wilh the VALUE
INC [DEC]
buttons.
Q-— 5 Press | EXIT
[two (2) times to return to Play mode.
© OK, now that we've checked that, set the MIDI receive channel on the effects unit to match
the GR - 1 basic channel (refer to the instructions in the effects unit manual).
@ Set the Program Change number that is transmitted for each patch on the GR - 1.
@-
1 cat up the GR - 1 patch with the pedals.
@— 2 Press EDIT[PATCH].
The * []" will flash.
@— 3 Press PARAMETER[PREVIOUS ]three (3) times.
This selects the "PG.CHG" screen.
The" 5 ^ will flash
@— 4 Press [ENTER]
Lets use "S-ALL
1" as an example.
In this ser
you can set what Program Change
number will be sent from the GR - 1's MIDI OUT port when you switch to this patch,
am on the
s unit that
This Program Change number should correspond to the pri
E
£
:
you want applied to the current Patch.
Q-— 5 Make this setting with the VALUE [INC | and
DEC] buttons. Now when you call
up this Patch, you should get the appropriate effects as well.
@— 6 Press
two (2) times.
This returns you to Play mode. You must
perform a Patch Write here
order to store the setting.
Advertisement
