Advertisement
3. Switching
the Effect
of the FAT."MOD
P edal
7-10
® Press} NEXT
| .
"This selects the Latch screen.
Turn this ON or OFF with the VALUE
INCIDEC] buttons
© switch Latch ON or OFF using the VALUE [INC Jang
DEC |buttons.
You can select between the following:
LATCH OFF
> The Fat effect is applied only while you have the pedal depressed. As soon
as you release the pedal, the Fat effect is turned off.
LATCH ON
: Acts like a switch —every time you depress the pedal, it alternates between
turning the Fat effect on and off.
® When you're finished making settings, press the | EXIT/NO |button two 2 times
You'll be returned to the Play mode.
* These System settings are retained in the GR - 1's memory even afler you turn the power
otf, so there's no need to perform a Patch Write.
* You can get the Fat effect by simply calling up the patch, even if you aren't in the Pedal
function mode (by using the GK - 2's
Switch). For details, see the Patch Common
discussion in Section 4, "FAT Initial Setting" ( «7 P. 4-21). (Note that you can't make this
setting for modulation.)
Advertisement
