Advertisement
&. Exchanging
Patches
and
Recorded
Songs
with
External
Devices
Via MIDI
When transmitting data to an external sequencer, just before Step
you need to put the external
sequencer in the proper mode for Real-Time Recording.
That
the sequencer will be recording the
the owners manual for the receiving devices).
lf you are going to be receiving data with a GR - 1, follow this procedure to put it in "receive ready"
state.
© Press EDIT | SYSTEM
The * DJ" will flash.
@) then press PARAMETER [NEXT ]three (3) times.
"BLK DUMP" is displayed.
The * 3" will flash.
(©) Press| ENTER/YES
| .
@ Press PARAMETER [PREVIOUS Jone (1) time.
This time you'll see "RECV" in the display. indicating that you are in a receive-ready condition.
6—32
Advertisement
