Advertisement
5. The
Recorder:
Miscellaneous
Settings
[]What
These
TEMPO 120
MER GEOFF.
QTZ
1718
OFSET
-p
BT
44/774
VELO
100
CLICK
"ON
COUNT
M2:
BEND
"OFF:
REPT
-OFF
LOOP
[OFF
Tempo. Tempo range: 20 to 250 beats per minute (bpm)
Sets the recording tempo. This feature works the same as the Tempo setting part of the REC/PLAY
screen.
Turns the Merge option on and oft. Settings: OFF, ON
In everything except Loop Recording. if you try to record new material on a track that already has
data on it, all that data is lost. However, with Merge set to ON, the new data you record will be
layered on top of existing dala, so that you can hear both parts together. (This setting has no effect on
how Loop Recording is handled.
Sets the Quantize resolution. Settings: nine different note values or OFF
This feature works the same as the Quantize part of the REC/PLAY
screen (see "Quantize" on page
5-1
Timing Offset. Range: -48 to +48
This allows fine adjustments of the recorded timing. Negative values move all the notes slightly
forward in time. and positive values delay them slightly. The effect is to "drag" or "push" the bear in
the recorded material, thus creating specific rhythmic feels.
Beat (Time Signature). Range: beats per measure, 1 to 16; note values, 2, 4, 8 or 16
This sets the time signature of the recorded material, and also the way the metronome will sound.
Tap Entry Velocity Value. Range: 1 to 127
This sets the (uniform) velocity of ali the notes you input when using Tap Entry for the Drum Part (c7
P.5-12). This setting is made the same as in the REC/PLAY screen.
Turns ihe metronome off and on. Settings: OFF, ON
This sets
whether or not you'll hear the meuonome during recording.
Length of the count-in. Range: MO, M1, M2, M4
This sets the length of the count-in you get between the time you press| START/STOP
[and when the
recording actually starts. "MO," then, means that recording starts immediately
upon pressing the
buiten. "M2" means two bars of count-in, and so on.
Pitch Bend Recording off and on. Settings: OFF, ON
In general, you can't record pitch bend mes sages on the Recorder. However, if you need to m
exception, turn this on.
* Pitch Bend messages involve a continuous stream of data, so in no time you could fill up
the Recorder's memory.
Repeat Play off and on. Settings: OFF, ON
Repeat Play plays the recorded song over and over again until you press the | b» / B | pedal or the
START/STOP
jbutton.
Loop Recording range. Range: OFF, 1 to 8 bars
When set to a number, that is the number of bars in the Loop Recording range. When set to off. you
get regular recording (no looping).
Advertisement
