Advertisement
6. Exchanging
Patches
and
Recorded
Songs
with
External
Devices
Via MIDI
How
to:
Transmit
Data
with
a Bulk
Dump
CD Press EDIT [SYSTEM ] .
E
lLi5 -COMMUN
The * Q" will flash.
(2) Press PARAMETER [NEXT |three (3) times.
The message "BLK DUMP" will appear in the screen.
Y
The * J" will flash.
G3 Press | ENTER/YES
| .
"SONG" now appears in the screen.
ien
PARAMETER| NEXT
If you move straight on to Step @ from here, you will transmit the song data from the song currently
in the Recorder. To transmit the patch data, press PARAMETER | NEXT | one (1) time from this
screen to select "PATCHALL." Or, if you want to transmit just one patch. use the VALUE
and
buttons to specify the patch number.
e After selecting the kind of data you want transmitted, make sure that the receiving end is
ready (see below), then press|
ENTER/YES
jtwo (2j times.
The data will be transmitted.
n
H
T
Jl
M
IN
When it's done, you'll see the message
screen we saw in Step QD.
Ia
WE ir
i
m!
* Selecting the "PATCHALL" entry means that you will be sending all settings relating to the
system along with the patch data. {This includes things like Master Tune, etc.)
& Press| EXIT/NO ]two (2) times.
This returns you to Play mode.
=J
Advertisement
