Advertisement
2. Recording
With
specify a new starting bar for recording. and fo
$
continue
recording. Wherever
you press the [BEC
button, you'll get a two
before recording actually begins.
Current bar (changes as you change Start bar)
with VALUE [NGI], back up with VALUE
BEG)
a When you've got all the recording done you want on this Part, switch to anotf
saw in
49— 2
@— 3
buttons to select the Part
!to record Parts 2 and 3
At this point though, when you're finished recording Part | and selecting the next part to record.
you H see a "P" (for Play") in the Part Select display next to the "
. This indicates that the Parl has
already been recorded. When you set th
"Play" to "M" ("Mute") with the VA
? cursor on this "P^ (it staris Mashing), you ean switch it from
[ENC] ana
DEC j buttons, This means you can choose to
hear Part 1 tor mute iD while recording the other Parts. You can do this with the other Parts, too
Change Parts with CURSOR [i>]
5
Switch between "P" and "M" with VALUE [[INCIDEGI
This
basically what you need io know to successfully record Parts 1, 2. and 3.
ection $, "Changing Things Like Volume and C annel for Each Part"
rP, 6-15).
We suggest you might want to watch the balance with the Dr m Part and if necessary. turn down Parts
1, 3 and 3 (things
sound different in a mix than the: y do on their own. and the Drum Parts tend to get
fost).
In addition. from the same starting screen, you can si
Receive channel, Pitch Bend R.
and MIDI Channel for each Part. In the Recorder settings, when Bend is an i € r
P.
27j and you are
usi
exierna
yhourd for recordin
you need to set the Pitch Bend range for cach Part the same
P.6-121
ànd again, when you're recording only the guitar (GK - 2) with the
Recorder, there's no need to
y about the MIDI channel.
he Pitch Bend ran
or more about tha
of the keyboard. F
eed
Loo
Loop Recording is when
you can go over and over the same
"build up" or
"laser" a recording a note or two at a lime. Usually this kind of rapa is usefui for Drum Parts. but it's
also convenient for recording Pans 1-3 if you want to record just a few measures ut a time, or there's
just one pia
tile.
u want to fix up a
"The Recorder; à
and "Entering the Drum Part
See Se
scellaneous Settings"
(er P. 5-26) for how te set the Loop m
for the actual steps to try Loop Recording.
0
Advertisement
