Advertisement
1. Playing
an External
Sound
Module
with
a Guitar
STROSS TET
tO
sarcoma
© Press PARAMETER | PREVIOUS
jthree (3) times.
'This selects the "PG.CHG" screen.
Lit
PG
IC ei
1
The * & " will flash.
e Press|
ENTER
| .
Right after the "S-ALL" is the Program Change number that is sent out whenever you select the patch
that you called up in Step (D.
Change this Program Change assignment
with the VALUE
and
buttons.
& Change this to the desired Program Change number with the VALUE
and
buttons.
©
Press|
EXIT
|two (2) times to return to Play mode.
*Be sure to carry out a Patch Write operation, as described in Section 3, "Patch Write"
(cr P. 3-14). Otherwise, this new setting will be lost the next time you switch patches.
D Repeat Steps (1; through ©) as many times as required to reassign all the patches you wish.
in Mono mode. you can also send out a different Program Change message for each of the six strings
(each Part), This way. if you're using a Type A sound module (multi-timbral, with six or more Parts),
with just one press of a pedal you can call up six completely different Tones to play.
How
to:
Transmit
a Different
Program
Change
for Each
String
different channels.
© Press the EDIT | PATCH
|button.
LII
P-NAM
The " f" will flash.
7^1 eS
I
Advertisement
