Advertisement
Recording
The On-Board Recorder and Multi-Timbral Sound
Module
[Objective]
In this section we'll explain about using the on-board Recorder
with the multi-timbral sound module. The GR
-1 is equipped
with a four-track Recorder (a simple sequencer with record and
playback
capabilities)
connected
to a fourPart
multi-timbral
sound module. You could use it to record all the backing parts
for a demo tape. or to give you intros when playing on stage, or
any number of other useful applications.
*For more information, see also Section 6. "Using the GR - | as an Expansion Module for an
External MIDI Device" on page 6-12.
*By "Track." we mean the "read" or "path" on which the recorded data is laid down. On the
GR — 1 at least, you could think of it as almost the same thing as a Part.
*Anytime you use the Recorder, but especially during a recording. please be very careful not
to turn off the power. This will wipe out song and patch data, and there is even the outside
chance that things may not work right when you turn the power back on. If that happens.
you will have to do a System Data, Patch and Song Initialize (as described on page 7 — 22).
This means, unfortunately, that all the settings and data you have changed up to this point
will be lost.
Advertisement
