Advertisement
With
Parts
1.2
and 3
How
to:
Record
Paris
1, 2 and
3
© Press EDIT | RECORDER/PART |.
That brings up the Recorder/Part screen, as shown below
instructions on page 5-32 to select a song on the GR - 1 i
Q Select the Tones you want to record for each Pari.
The " 9" will flash.
©
2 Now press
[ENTER/YES | to enter the following screen ior changing the Tone
you want for each Part.
PAR AMETER [PREVIOUS
..and when you've done that, assign the Tone using the VALUE | ING | DEC
buttons. You can play a little on the guitar to check that this is the Tone you
want, or...
Change the Tone number with the
VALUE INCIDEC} buttons.
[P] tunon. then CURSOR [41:5
.check the Tone name by pressing
return to the Tone number display.
Check the Tone name with CURSOR
Bei (back with fd)
* However, you can't insert patch switching messages
into a song with this procedure. For
that you
should
refer to Section
5. "6. Switching
Tones
and
Recording
During
a
Performance" (p. 5 — 28), where it talks about changing patches using the Pedals
E
Advertisement
