Advertisement
ide
Pano
Descriptions |
SERENE
(10)
(6) ORIGINAL TONE Buttons
(7) PARAMETER Buttons
Used tv select parameters (for editing), or for switching between
functions in the Edit mode.
(8) VALUE Buttons
In the Edit mode, use these buttons to scroll through parameter
INC | increases
button causes
values. When setting a numerical value, pressi
the value while
decreases it. Holding e
the numbers to change continuously. in the Play mode. the
buttons can be used to scroll througb Patch numbers,
(9) CURSOR Buttons
or right when nam
a Patch, or for selecting strings in the String
mode (oP P.3-13, 4-2),
EXIT/NO | Buttons
button
is used
(for example?
to select
ENTER/YES
ENTER/YES
functions or confirm choices. The | EXIT/NO | button is used for
returning
to the Play
mode
from
the current
screen
or for
and
a procedure.
* The values that you set in the Edit mode remain in effect
even after you press the | EXIT/NO | bution.
(13)
(18)
(D| REVERB/CHORUS
[Button
Turns the reverb and chorus effects on and off (cr P.3-9),
(2) RECORDER/PART | Button
Controls the internal Recorder ( £r P.5-1). Only the
START/STOP
|hutton function in the Play mode.
P and
(13) STRING MODE Buttons
Sets whether
each
string will play the Ist and/or
2nd Tone
fer p.36).
(14) PATCH GROUP Buttons
Used to switch between Patch Groups (c7 P.1-91. You can select
Group 1 or 2 from internal memory, or Group 3 or 4 when using a
Memory Card.
(15) EDIT Buttons
Used to enter the Edit mode . You can select one of four different
Edit modes : System { ©? P.7- D, Patch
(o> P4 1). Recorder/Part
ter P,.5- D. or Write/Copy (o7 P.3-141
Advertisement
