Advertisement
4. Transterring
Songs
from
a Sequencer
to
the
Recorder
(B Press [ENTEANES
This calls up the actual screen for downloading data
SONG CLR" will t
and the "OK?"
message in the corner will flash.
flashing.
[Cy That means there is data already stored in the Recorder which will be overwritten; is that
OK? Press| ENTER/YES |
Now yow H see the "STANDBY" mi
z in the screen.
* To cancel the download at any point, press the | EXIT/NO | button to return to Play mode.
© Start playback on the external MIDI sequencer.
The
screen
reads
"RECORDING"
to show
that the intemal
Recorder
has started
recording
(downloading) the data coming from the external sequencer,
*lf there's additional data that won't fit in the Recorder, you'll see the "Memory Full" error
message.
| IC me
| LI
lf this happens. press [EXIT/NO
two (2) times to return to Play mode.
Then reduce the
amount oí data by shortening the song or cutting out Pitch Bends. Repeat these steps to try
the download once again.
© Press}
EXIT/NO
itwo (2) times.
You'H be returned to Play mode.
Press the| START/STOP | button to try playing back some ol the downloaded data
6-23
Advertisement
