Advertisement
4, Adjusting
the
Pickup
Sensitivity
for Individual
String
e Play a note on any string to select that string for adjustment.
. You can
When you play a suing. the display
will change automatically to show that string mum
now adjust the sens
y of that string n:
"evel meter" display that looks
something like this:
|
| SE
ON
i jeer
Lii- anni
+
Level meter
© Adjust the input sensitivity using the VALUE | INC
jand] DEC
|buttons.
e from Oto 7. Just like on a tape recorder's level meter, set the
The sensitivity
is adjustable in a ras:
input sensitivity so that when playing hard the level meter only occasionally goes all the way over to
the sk mark on the right-hand side.
if you are almost constantly "pegging" the meter, press VALUE
to back off. If you are
never getting up to the * mark, press VALUE
to boost the level a bit.
& When you have adjusted the sensitivity of all the strings, press|
EXIT/NO
twice.
You will he returned to the Play mode.
* The above procedure will have to be repeated whenever you reinstall the GK - 2 pickup on
your guitar or change
the height of the divided pickup. Otherwise,
once
you have
completed the adjustment, these setting values are stored in memory, so that even if you
turn the power off you won't have to readjust the sensitivity every time.
Advertisement
