Advertisement
3. Teaming
Up
with
an
External
MIDI
Sequencer
[How to:
Use a DP2
to Switch
Local On/ OFF |
© in Play mode, press the EDIT | SYSTEM
|button.
"E:
|
ILI
|
*
The " 9" will flash.
Q Press PARAMETER[NEXT
four (4) times.
The display will read "EXT FOOT."
4—
The * 4" will flash
G Press| ENTER/YES
jto enable this setting.
THe * 4" now stops flashing.
@ Press the VALUE
and
buttons a couple times until this reads "LOCALOFF."
(5 Now that you've made the setting, press| EXIT/NO
|two (2j times.
You're back in Play mode.
* This new DP-2 setting is now stored in memory, even if you turn off the power.
Now when you step on the DP-2,
you'll be switched to Local Off (and you'll see "LOCALOFF" in
the display).
At that time, press the EDIT | SYSTEM ibuiton and the set "Local On/Off^ setting will be ignored
When you step on the pedal again, you will be returned to the norr
e
l
ta Ua
Advertisement
