Advertisement
l. Playing
an
External
Sound
Module
with
a Guiter
i ers
it:
I
3
The * 2" will flash.
0—3
This
is the
screen
we
want
for
setting
the
basic
channel,
so
press
ENTER/YES
|to enter.
4
Set this using thellNCland DEC} buttons
(in a range from 1 to 11, OFF; default is 11)
D—
4 Set this using the [tC] ana [DEC] buttons (in a range from 1 to 11; default is
11)
In this mode, you are only transmitting over one channel, so a basic channel setting of
"11" means you are transmitting ali notes from the GR - 1 over channel 11. This leaves
channels 12 through 16 available for other uses on your sound module.
[e Set the MIDI transmit mode to POLY.
Q-— 1 At the screen in Step (D-3, press the PARAMETER]
NEXT
jbuiton.
You'll see the following screen for switching modes.
Set this to POLY with the VALUE
button
(choices are MONO and POLY, with MONO
the default)(MONO/POLY
i
M
ON
UL E
td
(2)— 2 set this to POLY with the VALUE [INC |bution.
@ Set the Pitch Bend range.
Q-— 1 Atthe screen in Step @)-2, press the PARAMETER[NEXT
]button once.
This brings you to the Bend Range screen
—
LC
A
i -t
ESI.
al ioe
Change this setting with the VALUE INC) and
IL.
BENT
1g
[DEC] buttons (in a range from 0 to 24, with
12 being the default)
@-— 2 Set the Bend Range using the VALUE
[INC ]and[ DEC |buttons.
G-— 3 After you're done making the settings, press the| EXIT/NO
jbutton two (2) times
1o return to the Play screen.
Advertisement
