Advertisement
6. SwitchingTones
and
Recording
During
a Performance
@ Move from right to teft with the CURSOR [LE d butons (the side that is currently selected
will flash) and change the values with the VALUE
and [DEC ]buttons.
You have the following options for changing the left side {pedal assignment):
70
eS
4
i
So for example, "DWN - T 16" means that when you press the | DOWN | pedal during recording, you
will call up Original Tone 16, "ORGAN 1."
[B ]button.
q
SS
Emo
00
Y EAS
= !
ORGAN
1
Press CURSOR [to display the Tone name
(Ei returns you to the previous display)
© ater checking, press CURSOR [x].
This returns you to the display in Step (D.
Q Repeat Steps © to © until you've assigned Tones to all the pedals.
After making ali the settings, press | EXIT/NO
jtwo (2) times.
You will be returned to Play mode.
These settings are now stored in memory, so that you can change Tones during recording.
x When you do this, you must start and stop the Recorder with the | START/STOP
jbutton on
the panel, rather than the pedal.
x You can use a Pedal to insert patch change
messages,
however,
it cannot be done at
Step ©- 4 of "Recording with Parts 1, 2, and 3." (see p.5 — 7) Instead, after you've
recorded everything, go back and turn Recording Merge on (see p.5 — 27), then record
again and press the appropriate pedals to insert patch switching messages into the song.
tA i t2 D
Advertisement
