Setting Procedures - Omron NXR Series User Manual

Classification
IO-Link Master Unit Set-
tings
IO-Link Device Settings
7-1-2

Setting Procedures

Refer to 2-2 Application Procedures on page 2-6 for the setting procedures to access I/O data in the
IO-Link Master Unit from the Controller.
NXR-series IO-Link Master Unit for EtherCAT User's Manual (W640)
Item
Device Parameter Set-
tings
PDO Map Settings
Setting Parameters
Setting Explicit Device ID
Parameter Settings
7 Setting Up IO-Link Master Unit
Description
Set IO-Link master functions.
Set the allocation of data for the IO-Link Master Unit
that communicates process data with the Controller.
Set the parameter that is automatically set by the Con-
troller when EtherCAT communications start or when a
slave is reconnected.
Use the ID switch of the IO-Link Master Unit to set the
Explicit Device ID.
Set the IO-Link device parameters.
7
7-3