Omron NXR Series User Manual page 200

9 Functions
Set the Port £ Diagnosis Data/Lost Frames value to less than 255 to continue to count from the value.
To change the value, use SDO communications.
Reading Parameter Values
 Reading Parameters into the CX-ConfiguratorFDT's Diagnosis Tab Page
1
Select the DTM for the IO-Link Master Unit and go online with the Unit.
Refer to 10-2 Setting IO-Link Devices with the CX-ConfiguratorFDT on page 10-3 for informa-
tion on how to go online.
2
Select the DTM for the IO-Link Master Unit and right-click Diagnosis.
The Diagnosis tab page is displayed.
 Reading and Writing Parameters through SDO Communications
Read/write parameters from/to the following CoE objects through SDO communications.
9-30
NXR-series IO-Link Master Unit for EtherCAT User's Manual (W640)