Omron NXR Series User Manual page 187

Settings
Use the Sysmac Studio or SDO communications to configure the following settings.
Subin-
Index
dex
(hex)
(hex)
320C --- Offset Setting of Digital Input
Data Collection
01 Offset Setting of Port1 Digital
Input Data Collection
Subindexes: 02 to 07
08 Offset Setting of Port8 Digital
Input Data Collection
Refer to A-1-8 Manufacturer-specific Object 2 on page A-23 for information on CoE objects.
Refer to 7-2 Setting Device Parameters on page 7-4 for the setting procedure with the Sysmac Studio.
Refer to A-1-8 Manufacturer-specific Object 2 on page A-23 for CoE objects that are set through SDO
communications.
NXR-series IO-Link Master Unit for EtherCAT User's Manual (W640)
Size (Da-
Object name
ta type)
---
1 byte
(U8)
1 byte
(U8)
Description
---
Specify the position of the bit to extract from IO-Link Input
Data.
Setting range: 00 to FF hex
The default setting is 0.
Specify the position of the bit to extract from IO-Link Input
Data.
Setting range: 00 to FF hex
The default setting is 0.
9 Functions
9
9-17