Omron NXR Series User Manual page 331

Name
• • •
E001_Port8_Error_Status
E001_Port1_2_I_O_Port_Er-
ror_Status
• • •
E001_Port7_8_I_O_Port_Er-
ror_Status
E001_Operating
System-defined Variables
Name
_EC_PDSlavTbl[1]
_EC_CommErrTbl[1] BOOL
_EC_InDataInvalid
NXR-series IO-Link Master Unit for EtherCAT User's Manual (W640)
Data
Default
type
• • • • • •
WORD 16#0
WORD 16#0
• • • • • •
WORD 16#0
BOOL FALSE
Data
type
BOOL This data is for the built-in EtherCAT port in condition (1).
This bit indicates that the EtherCAT slave is communicating process data.
This data is for the built-in EtherCAT port in condition (2).
This bit indicates whether an error detected by the master occurred in the
EtherCAT slave.
BOOL This data is for the built-in EtherCAT port in condition (3).
This bit indicates whether the process data communications executed in the
primary periodic task are valid.
Comment
• • •
Defined with an internal variable.
This data is for condition (5).
It indicates the error status for port 8.
Defined with an IO-Link Master Unit device variable.
This data aggregates the error status for ports 1 and
2. The lower 1 byte indicates the error status for port
1 and the upper 1 byte indicates the error status for
port 2.
• • •
Defined with an IO-Link Master Unit device variable.
This data aggregates the error status for ports 7 and
8. The lower 1 byte indicates the error status for port
7 and the upper 1 byte indicates the error status for
port 8.
Defined with an internal variable.
This bit indicates that the IO-Link Master Unit is oper-
ating normally.
It is TRUE if conditions (1), (2) and (3) are met.
Comment
Appendices
A
A-51