Table of Contents
Advertisement
Operating
8.2 Remote operation
①
②
③
④
⑤
⑥
⑦
⑧
Measurement groups
• MP1 (Measurement Path 1)
– Process measurements (temperature and pressure)
– Concentration (display gas concentration)
– Laser optical transmission between emitter unit and receiver)
• TEC 0 (Laser temperature)
– Tec 0 (display measurement from first laser temperature control module)
• SYSTEM
– Display system health
104
Toggle between start/stop of the measurement. Stop pauses the data aquisition and data is saved.
Start continues the measurement logging from the last recorded data point.
Clears the memory and deletes all of the recorded data. Save your measurements before choosing
this option to avoid data loss.
Define sample time (how often data is read from device) in milliseconds. It is not recommended
to exceed a limit of 100,000 points.
Define how many samples will be stored in the hardware during the session. When the sample
limit is reached, the oldest logged data points will be overwritten and the log will continue.
Toggle between single y-axis/multi y-axes. This option applies when more than one measurement
is chosen from the table to be plotted.
For multi y-axes mode, user can choose which y-axis is main for the plot drawing.
Manual y-axis minimum value / manual y-axis maximum value.
Automatically adjusts the y-axis limits to fit the plot inside the plot window. The action is instan‐
taneous and is not recurring.
Operating Instructions, 05/2023, A5E51429088_AA
SITRANS TDL
Advertisement
Table of Contents
