Table of Contents
Advertisement
Operating
8.2 Remote operation
• Send & Save: Current parameter list is saved and sent to the device.
Note
Permanently save parameters with "Send & Save" activated
Parameters are only temporarily applied if "Send and Save" is selected. To permanently save
parameters, the "Send and Save" must be activated in the menu of the webpage.
• Send parameters: All parameters that have been changed are sent at once. Number in oval
indicates the number of parameters that will be sent but not saved. To save, ensure you select
"Send & Save".
Parameter groups
• MP1
– Medium temperature / Source
– Medium temperature / Fixed value
– Medium pressure / Source
– Medium pressure / Fixed value [mbar]
– Path length [m]
– Damping value T90 [s]
• IO
– Dout (Digital output 1 to 4)
– Aout (Analog output configuration - Signal, Simulation value, Lower range value, Upper
– Ain (Analog input configuration)
106
range value)
Operating Instructions, 05/2023, A5E51429088_AA
SITRANS TDL
Advertisement
Table of Contents
