Table of Contents
Advertisement
Remote operation
D.3 SIMATIC PDM
TCP port number: 502
Options
• Ethernet / IP address
• Ethernet / Subnet mask
• Ethernet / Default gateway
• DHCP: on/off
Note
Change to network settings
If the network settings are changed, the web server will disconnect and need to be restarted.
Depending on the changes, it might become necessary to adapt the IP settings of the computer.
D.3
SIMATIC PDM
D.3.1
Overview SIMATIC PDM
SIMATIC PDM (Process Device Manager) is a general-purpose, manufacturer-independent tool
for the configuration, parameter assignment, commissioning, diagnostics and maintenance of
intelligent field devices and field components. Follow-up installations and additional
information on SIMATIC PDM are available on the Internet at SIMATIC PDM
www.siemens.com/simatic-pdm).
SIMATIC PDM monitors the process values, alarms and status signals of the device. It
allows you to display, compare, adjust, verify, and simulate process device data; also to set
schedules for calibration and maintenance.
For information on, for example, how to install and integrate devices, commission
the software, see Operating Manual 'Help for SIMATIC PDM'. The manual is delivered
with SIMATIC PDM software. Once the SIMATIC PDM is installed on your computer
you find the manual under: Start > All programs > Siemens Automation > SIMATIC
> Documentation. Link at our website: SIMATIC PDM instructions and manuals
support.industry.siemens.com/cs/ww/en/ps/16983/man).
Note
Field device parameters
• For a list of parameters and additional information, consult section "Parameter assignment
(Page 113)".
• The field device remains in measurement mode during the time you configure the field
device.
158
(https://
Operating Instructions, 05/2023, A5E51429088_AA
(https://
SITRANS TDL
Advertisement
Table of Contents
