Siemens SITRANS TDL Operating Instructions Manual page 91

Note
Maximum and minimum values in edit view - numeric parameters
When "#######" symbol appears with "Min" or "Max" value in edit view, this indicates that the
parameter has no inherent minimum or maximum value.
Changing a value
Procedure
1. Select the digit to be changed by pressing
2. Use
Press and hold these buttons to accelerate scrolling through the text options.
3. Press
leftmost position to escape the view without changing the value.
Note
Proper configuration
Ensure that the new value is within the minimum/maximum range.
Button functions: Edit/Read only view
Use the local buttons on the HMI to view/change parameters as described below.
Button functions in edit view
Button
SITRANS TDL
Operating Instructions, 05/2023, A5E51429088_AA
button to increase the value and
button in the rightmost position to confirm the changes, or press
Function
Select the next left position.
If the most left position is selected, exit the parameter edit view without confirming the
changes. Keep pressing the button to jump to the most left position.
Change the selected number/character.
Numeric characters: increase the number by one (for example from 7 to 8)
ASCII characters: select the previous character in the alphabet.
Change the selected number/character.
Numeric characters: decrease the number by one (for example. from 8 to 7)
ASCII characters: select the next character in the alphabet.
Select the next right position.
If most right position is selected, confirm the change and exit the parameter edit view. Keep
pressing the button to jump to the most right position.
and buttons.
button and decrease the values.
Operating
8.1 Local operation
button in the
91