Table of Contents
Advertisement
Parameter assignment
This chapter includes all parameters accessible via local operation.
Note
Parameter visibility
A full list of available parameters and settings for each are shown in the manual. However, some
parameters and settings may not appear on the device, as visibility is based on the application
and configuration selected.
Parameters are identified by name (followed by parameter number in parenthesis), and
organized into function groups within a menu structure.
NOTICE
Navigating parameters on local display
• In parameter view, local buttons (
• Press
Note
Parameter settings properly stored
In order to ensure parameter settings are properly stored in the device and to the memory card
(if data logging is enabled), wait 30 seconds after any configuration change before removing
power from the device.
Note
Enable alarms and diagnostics
For any function that includes a parameter to enable alarms/diagnostics: a specific alarm/
diagnostic must first be enabled before a fault notification of the same type will display, when
a true fault actually occurs.
In the device menu that follows, alarms and diagnostics that are enabled by default are denoted
by an "X" beside the specific alarm/diagnostic name.
Note
Output remains active
While the device is being configured, the output remains active and continues to respond to
changes in the process.
SITRANS TDL
Operating Instructions, 05/2023, A5E51429088_AA
button to open edit view, or to save a modification.
) navigate in the direction of the arrow.
9
113
Advertisement
Table of Contents
