Bay-Tek CONNECT 4 HOOPS Service Manual page 16

CONNECT 4 HOOPS HD SETUP
Build Marquee:
Locate parts H, K, L, and the 2 J's from box # 2.
Lay out the boards on the floor as shown:
(The 2 J pieces are interchangeable.)
Using 2 people, one at each end,
position the 3 boards (H, L , & K) as shown
and assembly following these guidelines:
When assembling L to K - this left side has an extra power
connector going to the top of the game:
Plug the 4 pin Molex connector together.
Route the extra power cable through the hole in
the top panel L
J
H
16
J
H
L
J
K
L
J
K