Bay-Tek CONNECT 4 HOOPS Service Manual page 17

CONNECT 4 HOOPS HD SETUP
Carefully stuff the wire light cables inside the gap of the white cover as the notches are
lined up and wood is slid together.
This will provide the corner with a nice, clean finish.
Install corners (J) on assembly with 8 of black 10 X 5/8" screws
using a # 2 Square Head bit.
The corners are interchangeable and have
notches to help in positioning.
Install 2 more of black 10 X 5/8" screws into the bracket on
other side of top wood piece using a # 2 Square Head bit.
Repeat this process for the other corner using the other J
piece.
Remove the circular marquee from Box # 2.
Install circular marquee:
Using 2 people, stand the assembly upright on the floor in
front of the game.
Be sure the white plastic is facing out into the game room.
Ensure the red artwork in on the left side.
Marquee Mounting Options:
The marquee can either be mounted under the rood of the cabinet, or on top.
If you have at least 9 inches of clearance above your game (total of 117"), the round marquee may
be installed on top of the game. This is a matter of personal preference:
Standard mounting under the roof
A5SCPH150
Optional mounting on top
17
J
L