Bay-Tek CONNECT 4 HOOPS Service Manual page 35

BALL GATE MOTOR, SENSOR AND HOOP SENSORS
Detector
Emitters
# 1 # 2
A5CB10001
All ball sensor boards have 4 emitters and 1 detector
on opposite sides of the board.
The far left (#1) board can be swapped into a location
with a faulty emitter.
The far right (#8) board can be swapped into a location
with a faulty detector.
AACE15011
Pink
Connect-
AACE15012
WIRING DIAGRAM
A5CB10001
# 3 # 4
Sensor Boards are plugged into the Aux Board
#1 to #1
#2 to #2
Etc..
# 8 # 7 # 6 # 5 # 4 # 3 # 2 # 1
AACB10000
Control Board
A5CCORD40
USB Cable
A5CB5190A Sensor
Always 12 Volts DC between the
yellow and blue wires
When sensor is blocked, 5 VDC
between the white and blue wires.
When sensor is not blocked, 0 VDC
between white and blue wires
# 5 # 6
AACE15036
To LED's under
AACE15015
5 & 12 Volt DC Power in
from Distribution Board
35
# 7
Similar cable goes to every sensor.
8 cables per game.
AACE15000
Baskets
A5MO5154
Motor
10 RPM
45-50 Ohms
# 8