Bay-Tek CONNECT 4 HOOPS Service Manual page 12

CONNECT 4 HOOPS HD SETUP
Locate part C (wood diverter) from box # 1 and affix to
part B as shown with 4 of black 10 X 5/8" screws using a
# 2 Square Head bit.
Similarly, locate part D (wood diverter) from box # 1 and
affix to part B as shown with 4 of black 10 X 5/8" screws
using a # 2 Square Head bit.
Locate part E (left side) from box # 1 and affix to part B
as shown with 3 of black #8 X 1¼" Bugle screws using a
# 2 Square Head bit
Ensure the front and rear edge of part E is aligned
properly with the lower cabinet.
This will be carefully balanced until the other side
and top plate is attached.
A5SCPH150
A5SCPH150
A5WALO010
12
C
B
D
B
E
B