Bay-Tek CONNECT 4 HOOPS Service Manual page 10

CONNECT 4 HOOPS HD SETUP
From the small pallet, unwrap and remove
Cardboard Box # 1 - set aside for later use.
Using 3 people, remove the wood platform (Part A) from
the shipping configuration by removing the 4 Phillips bolts.
(2 on each side)
2 people should hold and support the wood as bolts are
removed.
Remove the part A and set aside for later use.
The 6 Game Balls, Service Manual, Hardware Kit, and
Power Cord are located in this area of the front console.
Game keys are also located in this area.
Using 3 people, remove the Upper rear Cabinet from the
shipping configuration by removing the 8 Phillips bolts.
(4 on each side)
2 people should hold and support the wood as bolts are
removed.
Set the Upper Rear Cabinet aside for later use.
The support wood should be removed from the Front
Console. This support wood is not used in game assembly.
Remove the Front Console from the pallet by removing the
wood blocks holding this to the pallet. Set aside for later use.
Using 2 people, position upper rear cabinet behind
lower rear cabinet, which is in place, about 6 feet away
from the wall.
10
Upper Rear
Cabinet
A
Front
Console
M
Lower Rear
Cabinet
N
Upper Rear
Cabinet
O
O