Bay-Tek CONNECT 4 HOOPS Service Manual page 18

CONNECT 4 HOOPS HD SETUP
Option A: Standard mounting under the roof
Remove the circular marquee from Box # 2.
Install circular marquee:
Using 2 people, stand the assembly upright on the floor in
front of the game.
Be sure the white plastic is facing out into the game room.
Ensure the red artwork in on the left side.
Using 3 people, lift the circular marquee up into position on
top of the front section.
Push the power cable from marquee into the hole in top wood.
Secure marquee onto assembly using 8 of ¼-20 X 1 1/2" Phillips head bolts using a # 3
Phillips Head bit into each support bracket.
(4 per side) Place a 1/4" split washer onto the bolt then insert into the
metal support bracket.
A5BOPH320
A5WASI020
Place bracket up against the wood, push
bolt/split washer through holes.
Place a 1/4" flat washer and 1/4" nut on top of wood a
and tighten using a 7/16" wrench.
Repeat process for other support bracket.
A5WAFL060 A5NULO050
18