PIPER CHEROKEE WARRIOR SERVICE MANUAL
d. Seal and couple hose fittings (seal with Loctite refrigerant sealant applied to flares only).
e. Adjust condenser per condenser assembly rigging instructions.
Cabin rear panel must be replaced and sealed in the original
m a n n e r. If not sealed properly, exhaust gases can seep into
cabin due to low pressure area in cabin.
Test for carbon monoxide on ground and in flight with and
without air conditioner operating. Presence of CO must not
exceed 1 part in 20,000.
f. Seal around forward cover panel (and aft cover panel if removed) with Permagum Bead no. 576
purchased from Prestolite Engineering Company. (See Figure 14-11.)
Revised: February 28, 1995
WARNING
WARNING
Figure 14-11. Condenser Air Scoop Installation
3B18
Island Enterprises
ACCESSORIES AND UTILITIES