PIPER CHEROKEE WARRIOR SERVICE MANUAL
g. Painting the Repair:
Not all lacquers or enamels can be used on thermoplastics.
Some paint solvents will affect and degrade the plastic properties.
Do not use hard, brittle coatings in flexing, impact, or high
stress areas. Such coating may crack, creating a weak area.
1. An important factor in obtaining a quality paint finish is the proper preparation of the repair
and surrounding area before applying any paint.
2. Clean parts before painting with a commercial cleaner or a solution made from 1/4 cup of
detergent mixed with one gallon of water.
3. Use lacquer or enamel paint for thermoplastic repair.
4-5 8 a . A.B.S. THERMOPLASTIC LANDING GEAR WHEEL AND STRUT FAIRING REPA I R
I N S T R U C T I O N S .
Instructions covering the wheel and strut fairing are contained in a special Wheel and Strut Fairing
Repair Instruction Manual P/N 761 708V. This manual is obtainable from Vero Beach Service and Sales
Department, Piper, Aircraft Corporation, 2926 Piper Drive, Vero Beach, Florida 32960.
Revised: February 28, 1995
Fgure 4-18. Repairing of Cracks
CAUTION
CAUTION
1F21
Island Enterprises
STRUCTURES