Inverter Operation Mode - Goodwe ET Series User Manual

03 Product Introduction

3.3.2 Inverter Operation Mode

Waiting mode
Fault mode
No. Parts
1 Waiting
mode • When the conditions are met, it enters the self-check mode.
•
2 Self-check
mode initialization, etc.
• When the conditions are met, it enters the grid-tied mode, and the
•
mode.
• If the self-check is not passed, it enters the fault mode.
3 Grid-Tied
mode •
• If a fault is detected, it enters the fault mode.
•
output function is not turned on, it enters the wait mode.
4
mode
• If a fault is detected, it enters the fault mode.
•
output function is not turned on, it enters the wait mode.
•
output function is turned on, it enters the self-check mode.
5 Fault mode
cleared, it enters the wait mode.
User Manual V1.0-2022-08-30
Self-check
mode
Grid-Tied mode
Description
14