Machine Identification (Fig. 5); Description Of The Safety Devices; Regulatory References - COMENDA AC2 Series Use And Maintenance Instructions

1.6 MACHINE IDENTIFICATION (Fig. 5)

• The serial number and the data relating to the machine are written on the plate (3) positioned on the right
side of the electrical box.
EN
To request technical support or to order spare parts, always include the model and serial number of the machine.

1.7 DESCRIPTION OF THE SAFETY DEVICES

• The AC2 models are equipped with a safety microswitch which blocks the washing pump in the event of
accidental opening of the tank access doors.
• Electrical parts closed by panels locked with screws.
• Equipotential earth electrode.
• The peak sound pressure level Lpc is not declared as it is well below 130dB(A).

1.8 REGULATORY REFERENCES

• The machine and its safety devices are built in compliance with the following standards:
• The essential safety requirements set out in directive 2006/42/EC, 2014/30/EC, 2014/35/EC.
• The requirements established by directive 2011/65/EU (RoHS 2).
14
IMPORTANT