COMENDA EC90 Instruction Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Manuale di istruzione per

Notice d'utilisation pour

Gebrauchsanweisung für

Instruction manual for

Manual de instrucciones para

lavastoviglie

lave- - - - vaisselle

lave

vaisselle

lave

vaisselle

Geschirrspüler

dishwashers

lavavajillas

Mod.

EC90

Table of Contents

Need help?

Do you have a question about the EC90 and is the answer not in the manual?

Questions and answers

Summary of Contents for COMENDA EC90

Page 1 Geschirrspüler Geschirrspüler Instruction manual for Instruction manual for Instruction manual for Instruction manual for dishwashers dishwashers dishwashers dishwashers Manual de instrucciones para Manual de instrucciones para Manual de instrucciones para Manual de instrucciones para lavavajillas lavavajillas lavavajillas lavavajillas Mod. EC90...
Page 2 INSTRUCTIONS FOR THE USER FOREWORD 1. Read the instructions contained in the enclosed booklet carefully, because it contains important information on installation, operation and maintenance safety. Store this booklet carefully for any further consultation by other operators. 2. Having removed the packing material, check that all the equipment is present.
Page 3 INSTRUCTIONS FOR THE USER INSTRUCTIONS FOR USE...
Page 4: Control Panel
INSTRUCTIONS FOR THE USER CONTROL PANEL CONTROL PANEL CONTROL PANEL CONTROL PANEL H2 H3 EC90 Pilot lamp "machine READY" Pilot lamp "machine WORKING" Main switch GREEN Machine OFF Machine ON / Wash cycle Machine ON / Regeneration cycle (if required) Push button "REGENERATION START"...
Page 5: Operation And Use
INSTRUCTIONS FOR THE USER OPERATION AND USE 1. Before washing make sure that: • the wall-mounted on/off switch is switched on; • the water tap is open; • water is present in the distribution network; • the pump protection filters are installed in their respective positions; •...
Page 6 INSTRUCTIONS FOR THE USER ATTENTION: Machine in conformity with the existing hygienic standards, guaranteeing a final rinse at 85°C. Wash cycle automatically lengthened if final rinse temperature is not reached.When this auto-cycle intervenes and the cycle is pro-longed, after 8 minutes the "H3" indicator flashes to indicate this intervention and the cycle continues (water supply temperature is likely to be the problem, otherwise contact an assistance center since it is a rinse water heating intervention.).
Page 7 INSTRUCTIONS FOR THE USER INSTRUCTIONS DURING THE WASHING 1)Do not plunge bare hands into the water containing the detergent. If this happens, wash them immediately and abundantly with fresh water. 2)When the machine is operating, do not open the door too rapidly. 3)Use only specific anti-foaming detergents.
Page 8: Useful Suggestions
INSTRUCTIONS FOR THE USER USEFUL SUGGESTIONS 1) MAINTENANCE IMPORTANT: Before carrying out the cleaning and maintenance operations, disconnect the equipment from the electric supply. Frequently check and clean the nozzles. The frequency of this operation will depend on the quantity of residues, which may result in an unsatisfactory washing result.
Page 9: Hard Water Conditions
INSTRUCTIONS FOR THE USER 4)SANITIZING THE MACHINE Sanitizing the machine at least once a week is of the utmost importance in order to guarantee hygiene even when the machine is not in use. It is advisable to use a disinfecting product suggested by an authorised detergent dealer.
Page 10: Installation And Maintenance Instructions
INSTALLATION AND MAINTENANCE INSTRUCTIONS The following instructions are addressed to a qualified personnel the only one authorised to carry out checks and repairs, if any. The manufacturer declines any responsibility in the case of interventions made by a non qualified personnel or the use of spare parts other than those supplied by the Manufacture.
Page 11: Installation
3mm and a supply cable no less than 2.5mm². Modello 220/230V∼ 220/230V 3∼ 380/400V 3N∼ EC90 For other supplies the cable cross section and the circuit breaker switch must be calculated according to voltage and length of cabling. If cabling too long adjust cable size to Amp rating;...
Page 12 INSTRUCTIONS FOR TECHNICAL PERSONNEL 2)WATER CONNECTION Install a 55°C water tap in a well accessible place, terminating in a 3/4" fitting, which the pipe strainer and inlet hose shall be connected to. Carefully comply with any national or regional regulations in force. The operating pressure should be neither less than 2 bars or greater that 4 bars (200/400 kPa).
Page 13: Loading And Unloading Of The Machine
(W) electric racks per racks per load (W) hour with hour with 55°C inlet 12°C inlet water water EC90 2200 8000 8750 48/30/20 In the event of low water supply temperature, the will be a subsequent machine output drop.
Page 14: Wiring Diagram
INSTRUCTIONS FOR TECHNICAL PERSONNEL WIRING DIAGRAM Anti noise filter Condensator Booster heater Tank heater Pilot lamp machine ready Pilot lamp machine working Booster heater contactor KE2b Safety contactor of booster heater KM3 Wash pump contactor Rinse pump (if required) Wash pump Drain pump (if required) Detergent dispenser (if required) Main switch...

COMENDA EC90 Instruction Manual

Quick Links

Need help?

Questions and answers

Related Manuals for COMENDA EC90

Summary of Contents for COMENDA EC90

Table of Contents