Drive Report
This report displays information about each drive installed in the library:
•
Type of drives installed
•
Interface of each drive (SCSI or Fibre)
•
Each drive's serial number
•
Firmware version installed on each drive
Blade Report
This report displays information on each blade installed in the library:
•
Type of blade
•
Each blade's serial number
•
Firmware version installed on each blade
Test Results
The test logs contain information about why a test passed, was marginal or failed. See
information:
Table 1
IVT Test Results
A MARGINAL result will be displayed as "Passed." Be sure to review the test
Note
logs regardless of the displayed result.
Details about the test are found in the Robot Control System (RCS) test logs. To view this log, select View
Test Logs from the Installation Test dialog box.
This log file is appended with data as each test finishes. You can re-run the test if any problems are found
and fixed. If the Installation Test dialog was not closed during the retesting, all results are contained in one
log file.
72
AMC Test
Log Entry
Results
PASSED
Passed
MARGINAL
Passed
FAILED
Failed
Definition
Completed the test without
errors
Completed the test but the
system had to retry or had to
skip part of the test. Review the
logs to determine if the error is
preventable.
An error has been found and
needs to be corrected. A fatal
error, or error that causes a part
of the system to become
disabled, will halt the test.
Hardware Verification
Table 1
for