Drive Configuration; On-Line Mode - ADIC VLS 4mm Installation And Operating Manual

Drive Configuration

This function lets you enable or disable which drives are on-line.
Use LEFT or RIGHT
DOWN to select "Y" to put the drive on-line or "N" to disable the drive. If you
have only one drive installed, you cannot access the Drv B field.
dXU \Qcd QTTbUcc cUddY^W D_ QccebU dXQd QTTbUcc SXQ^WUc Q^T TbYfU
Disabling both drives is not allowed (setting "N" in Drv A or Drv B field
automatically places "Y" in the other field).

On-Line Mode

Lets you select random-access or sequential-access operating mode.
When used in random-access mode, the VLS allows software selection of any cassette
in the magazine in any order. You can logically divide cassette usage to satisfy
particular data storage needs. For example, you can assign one or more cassettes to
specific data functions (such as certain directories or network servers), or you can
assign specific cassettes to individual users.
to select the drive you wish to change. Use UP
Note
Note
Equipment Description
or
23