Running The Remote Client - ADIC Scalar i2000 Installation Manual

Running the Remote Client

Once the remote client is launched and running, the library server can communicate with the LMC remote
client while on the same local area network, wide area network or through a virtual private network (VPN).
The remote client currently does not support accessing the library across firewall security. A firewall may be
bypassed by means of a VPN, however. Refer to
Other remote client limitations include:
• Only one remote client should be running and logged into the library at any one time.
• Only one instance of the remote client should be open and running on any single remote host
computer. This is true even if each separate instance of the remote LMC client is pointing to a
different library. Refer to
Figure 11 Accessing the Library Across the Firewall
Remote
Host w/
Single LMC
Client
VPN
Figure 12 Multiple Clients on the Same Remote Host Computer
Scalar i2000
Library
106
Figure 12 below.
Remote
Host w/
Single LMC
Client
Scalar i2000
Library
Remote Host Computer
LMC
LMC
Client
Client
Scalar i2000
Library
Figure 11 below.
Firewall Security
This configuration is not supported.
Setting up the Library for Remote Access